As the year 2011 is over, it’s now the time to announce the Cisco certification survey results for the poll that took place in 2011 starting from April, Although the number of people whom actually voted for our polls were to minimum and could lead not to accurate results, I still thought I should share [...]

As you know I have three Cisco 2821 routers; each with 2 VWIC-2T1/E1 Cards to connect to PTSN, the Cisco Router I have run c2800nm-spservicesk9-mz.150-1.M4.bin IOS image and come with Cisco Configuration Professional Express pre-installed. Cisco Configuration Professional is a new Cisco GUI Management Interface that you need to install in your laptop it is [...]

clock timezone GMT 3 network-clock-participate wic (Card-number) network-clock-select 1 E1 (Port-number) isdn switch-type primary-net5 controller E1 (Port-number) pri-group timeslots 1-30 exit interface Serial(Prot-number):15 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn incoming-voice voice no cdp enable exit dial-peer voice( tag-number) pots destination-pattern 9.[123456789]T incoming called-number  . fax rate disable direct-inward-dial  port (Port-number):15 exit telephony-service dialplan-pattern 1 [...]

Each Country has its own frequency settings for Call Progress tones that are reguarly set by the Ministry of Communication. Those tones include the busy, ringback, reorder, and out-of-service tone. First thing you need to do is to create a Custom CPtone settings for Kuwait using the below comands: voice class custom-cptone kwtone dualtone busy frequency 425 425 [...]